Jump to content

nightcrawler

Members
  • Content Count

    24
  • Joined

  • Last visited

Posts posted by nightcrawler


  1. Tiffin said the driver side slides are electrical(switch has to be on), but passenger sides are hydrolic(they work). Just had step motor, etc. replaced and when we went to pick it up, house batteries were dead (forgot to turn off inverter) and all these things were not working(wipers, heat/air fan, camera,brake assist beeping).


  2. Thanks, we just bought this Phaeton two years ago, did not realize that the residential fridge was not factory installed. Our inverter starts beeping much sooner than six hours of driving, sometimes just about 30 minutes.


  3. 13 hours ago, manholt said:

    Is it the Inverter, or is the beep from fridge?  If the fridge looses it's air tight seal, you'll get on/off beep!

    Engine charges start batteries, generator or shore power charges house batteries.

     

    11 hours ago, oldmarine said:

    Hi Nightcrawler , we have a2010 Phaeton with a Residential Fridge . same Problem .2010's dit not come with this Fridge from Factory . To me this happens about 6 Hours out when driving

    have to start the Genny + run for about 1 -1 1/2 Hours . this stops the beebs , I dont think it was wired for this or this Electrical Load , We dit not ever had this until after we got rid of the NO COLD Fridge . I just learned to live with it .

    Old Marine

     


  4. 2010 Tiffin Phaeton - the inverter beeps off and on while traveling. Have residential size refrigerator. Is the engine supposed to be charging the house batteries while traveling? What could be causing the invertor to beep off and on? Batteries tested good, while stationary and not plugged into shore power.


  5. 4 hours ago, wolfe10 said:

    What electric furnace are you asking about? 

     

    1 hour ago, richard5933 said:

    I think that there's also an LP version of the Aqua Hot system. http://www.aquahot.com/Products/RV/400P.aspx

    Please provide more information (coach make/model as well as the furnace make/model) and it will be easier to give you some help.

    It is a Coleman Mach in a Tiffin Phaeton

    It is a Coleman Mach, in a Tiffin Phaeton


  6. 20 minutes ago, WILDEBILL308 said:

    First guess is a bad fan bearing. Does it make noise when it starts then tapers down? Do you have any sticks or branches sticking into the fan? In the past I have added a little light oil to the shaft bearing and it helped. With the fan off use a piece of duct tape to make a little pan under the fan shaft. Then squirt a little oil on to the shaft where it goes into the bering. The tape will help it to stay in place for it to be sucked into the bering.

    Let us know what you find.

    Bill

    It makes the very loud vibrating sound with just the fan on

    Having hard time getting one screw out of cover 

×
×
  • Create New...