Jump to content

flyboy330

Members
 View Profile  See their activity

  • Content Count

    7

  • Joined

  • Last visited

  • Days Won

    1

Posts posted by flyboy330

  1. Posted · Report reply

    Hi Bill,

    Thanks for your great tips. I had my converter box in line between the antenna and the control box. I just moved it so that it is in line after the control box and before the TV. It works much better.

    The website for locating TV transmission towers is simple to use and will be a tremendous help.

    Thanks again for the great tips.

  4. Posted · Report reply

    Wow, being new to the RV community, I am totally impressed by the experience and knowledge of the responders to my initial post. I talked to the people at Xantrex and was told that a high reading is normal when there is no load on the inverter. I guess that the clock on the microwave is considered no load. The Xantrex folks suggested that I put a load on the inverter and recheck the voltage. It worked. As soon as I put a load on the inverter, the voltage dropped immediately to 120.

    Now I have to figure out why my Norcold 1200LRIM refrigerator will not run on the inverter. It works fine on the gen set and shore power but not the inverter. I have been advised to not use the LP setting while driving down the road. Thinking that the no load high voltage on the inverter might be the problem, I put a load on the inverter and the refrigerator still beeped and flashed a "no AC" message. My next step is to call Norcold. As a side note, my refrigerator was manufactured after the recall group.

    Thanks again to everyone for their help and wonderful technical expertise.

    Roger Olson

×
×
  • Create New...