Jump to content

epstep

Members
 View Profile  See their activity

  • Content Count

    36

  • Joined

  • Last visited

  • Days Won

    1

Posts posted by epstep

  4. Posted · Report reply

    Unfortunately I am on the downside if my current MH.  Its funny that I did get in touch with Essex they asked for some info and I haven't been able to get in touch with them   The dealer I am dealing with Northside RV in Lexington KY were able to get me a decent deal/

     

     

  11. Posted · Report reply

    Its not hi mileage on the rig, my mh has 5500 miles its whether the person used full synthetic, I have no way of knowing. I read some where if you used the full synthetic blend vs regular synthetic you were not supposed to revert back

    I hope I have this right

  14. Posted · Report reply

    I recently bought a used 2014 Tiffin Allegro 36LA.

    I am getting ready to change the oil in the engine and the generator.

    Unfortunately I can not find out what the previous owner used.

    I am told if you use the Mobil 1 synthetic and you had used the high mileage its not recommended to go back to the regular Mobil 1.

    And what brand of grease for the front end is recommended?

    Just your thoughts as well for the generator.

  18. Posted · Report reply

    I have the same problem with my Fleetwood Southwind. I am due to go in for service on the 28th of Oct.

    I have the gouges (indentions from roller wear as well) on my last day out, the slide hesitated before coming in. From what I can

    find out that there are adjustments that can be made. The question being is how does it get out of adjustment like that.

    My rig is always level before extending etc

    Right now I am afraid to open my driver side slide for the fear of it causing some real damage.

    Here is a link from another website irv2 http://www.irv2.com/forums/showthread.php?t=264845&goto=newpost

  22. Posted · Report reply

    I am having some concerns with my driver side slide when retracting. It is a Southwind 34A.

    It sometime doesn't do anything for a few seconds (up to about 5) then makes a loud popping noise and the slide comes in.

    1- I have tried this with a lot of the weight out of the storage compartments and it doesn't seem to make a difference whether I unload them or not. I try not to load up that side.

    2- My bedroom slide works well and I feel that the the slide should work the same.

    3- On the floor I see indentations from the rollers where the large side rests on the floor.

    What I can mention is that the MH is level, the noise is starting to scare me a bit. What I did notice when I was checking under the slide topper is that the rubber gasket was hanging out and hanging about the top of the slide.

    Any help will be appreciated.

×
×
  • Create New...