jimcathy21502

I have just replaced the 2 zone thermostat on my '08 Southwind MH. The thermostat doesn't seem to be communicating with the control box on the roof air. Any help available?

We have a 2010 Ford Fusion and have towed it about 10K miles without incident in the last 2 years. I follow the owners manual instructions, including keeping the fluid at the lower limit of full, running the car for 5 minutes before starting for the day, running it again for 5 minutes at our lunch stop, shifting to D, then R, then N before turning the key to ACC. Remco does now have a Ford kit with their pump system, but I have decided not to get is since I have had no problems.

I have had both and have had no major problems with either. My hydraulics were HWH on a 1998 Winnebago Adventurer and my electrics are Power Gear on a 2008 Fleetwood Southwind. My electrics had to have some work done when the rig was new (2008) and the Power Gear tech told me it was CRITICAL that all connecting plugs be clean and tight. He cleaned them all and used wire ties to keep them tight. No problems since. This summwer, I will check, clean, replug, and re-tie all of them.