Jump to content
ctammyh@hotmail.com

Maintenance and repair

Recommended Posts

We had some work done, 28 items, by Lakeshore Custom RV in Iuka, MS. which is next to Red Bay. They were Tiffin employees who have just opened this business and the Owner, Nathan was one of the few inspectors who was able to inspect every stage of production. They are real heavy on the chassis work but knew every system on the Bus. All work was completed in 2 days and we were able to stay on site in the bus at night with water and 50 amp power provided. This is how good they are, when it was pointed out that 2 of my slide toppers were with small rips they got the material, replaced them, checked and caulked the roof all within the original time frame. They also serviced the Agua Hot and flushed the system, replaced every oil, fuel, and air filter on the entire bus along with the fluid. Added Centramatic Balancers to the 3 axles and replaced the 4 air valves, 2 that are adjustable that add pressure to the main and tag axle. This is only a part of the work they did and does not include the OTA antenna, electronic door key pad, door key fobs or the new panel for the door shades and programing for the above. If you are over that way and want to check them out Nathan's cell is 256-668-2195, Office is 662-273-1003, their labor rate was $75.00/hr. Hope this helps as I know it has been a problem getting every thing done at one place in a timely manner.
Bill
__________________
2011 Tiffin Allegro Bus 43 QRP
Cummins 8.9, Mileage 24,850.

Share this post


Link to post
Share on other sites

WOW.  Great information!  DD69 is correct...we all search for the one stop shop, that has experience and great rates! :)

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now

×
×
  • Create New...