Jump to content
tomdresse

Blue Ox installation on 2016 Lincoln MKX and 2016 American Revolution

Recommended Posts

I have a 2016 American Revolution and a 2016 Lincoln MKX with a new Blue Ox flat tow package installed.   From the very start following installation when towing and making a 90 degree turn (visualize at a Stop Sign and turning either right or left) when making the turn about 90 degrees thru the turn and acceleration the front end of the car starts shaking violently.   I have taken the rig with car to the installer and they assure me, after inspection, that installation is proper.   I have taken the rig and car to the Lincoln dealer several times replicating each time after they have checked the alignment that all is correct.   Blue Ox people say its not our fault and Lincoln say its not the car's fault.   I'm out of ideas, any suggestions?   Oh by the way both parties say they have zero history of my problem.    Blue Ox calls the behavior the "Death Wobble".

Share this post


Link to post
Share on other sites

You need to contact other owners that are using the same car.  It is not a common toad so it may take some doing.  
When a customer ask me what would be the recomended toad I always say to look around and see what it the most used vehicle in the type of toad you want.  I always tell them not to be the first one to try one set up, because the problems associated with being an early adopter. 

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...