jc21014 Report post Posted July 17, 2019 In addition to my power cord electric giving me fits, the Oasis system gave an error message yesterday as we prepared to leave the cg in upper Michigan. the error message is: heater Module Fault red led is on. This apparently means the combustion fan has shot craps according to the Oasis tech I talked with. No diesel burner but according to the tech, I can still get hot water for dishes and showers by turning both ac elements on then off when done. This really sucks and is becoming a little annoying. In regards to the cord reel issue, I managed to find a number of past posts in Irv2 where others had similar issues due to the contacts becoming pitted. Seems most either replaced the reels, as they are not repairable or dumped the reel and wired the power cord direct to their ems system and coiled the cord inside the compartment after use. Share this post Link to post Share on other sites
