Trim Insert

[fashafer1]

Looking for source for Trim Insert.  I have a 2000 Four Winds Class C motorhome.

 

[rossboyer]

Please explain more about what trim insert you are wanting. If it is a strip of plastic that fits in the horizontal metal trim, then measure a piece of the old plastic. Usually, the plastic is squeezed to fit in the groove top and bottom. I replaced mine with trim I found at a salvage RV supply which was sold by the foot. You might try Ickes RV Surplus Supplies, 765-728-5668. 

[fashafer1]

It is a strip of plastic fitting the horizontal metal trim.  Measures just a bit less than 3/4", so I think I  need at least 7/8" or 1" width. Thanks for response. 

 

[jleamont]

I believe you are looking for this product? 

https://www.etrailer.com/RV-Exterior/Camco/CAM25113.html?feed=npn&gclid=EAIaIQobChMInv7Mp4us6QIVForICh1dpgT-EAQYASABEgIGCvD_BwE

[dickandlois]

2 hours ago, fashafer1 said:

Looking for source for Trim Insert.  I have a 2000 Four Winds Class C motorhome.

 

If you can attach a picture or 2 to a response. That would help pin down what you are looking for.

Rich.

[rossboyer]

4 hours ago, jleamont said:

I believe you are looking for this product? 

https://www.etrailer.com/RV-Exterior/Camco/CAM25113.html?feed=npn&gclid=EAIaIQobChMInv7Mp4us6QIVForICh1dpgT-EAQYASABEgIGCvD_BwE

That is what I was trying to describe. What I used was white, but it was available in white, black and beige and various widths. 

[kaypsmith]

https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=rv+exterior+trim&_sacat=0&LH_TitleDesc=0&_osacat=0&_odkw=rv+exterior+trim

I've bought hundreds of feet of it on ebay.