yuccarob Report post Posted June 12, 2021 Can someone please tell me where the ATS is on my 2008 Fleetwood 38F Expedition FIN 730F84402374 Share this post Link to post Share on other sites
rossboyer Report post Posted June 12, 2021 On my 2006, it is in the electrical bay where the inverter/charger is located. Look high on the left side wall. Identified with a lot of wire entering and exiting the black box. Measures about 8”Wx10”Hx3”D. Share this post Link to post Share on other sites
elkhartjim Report post Posted June 12, 2021 Normally it is in the same bay as the power cord. My 08 Fleetwood Bounder ATS was under the bed. I had to remove the floor to get to it. Share this post Link to post Share on other sites
manholt Report post Posted June 12, 2021 My old coach, 2010 AC Tradition was under the bed and a real PIA to get to....as Joe L., can attest to! Share this post Link to post Share on other sites
wildebill308 Report post Posted June 12, 2021 (edited) 7 hours ago, yuccarob said: Can someone please tell me where the ATS is on my 2008 Fleetwood 38F Expedition FIN 730F84402374 Welcome to the forum. I, like others would look under the bead. you might have to remove some protective wood panels. Follow the heavy cables. Have you asked teck support? They are usually pretty good. Bill Edited June 12, 2021 by wildebill308 Share this post Link to post Share on other sites
elkhartjim Report post Posted June 13, 2021 Either he found it or didn't need to know quickly. Share this post Link to post Share on other sites
yuccarob Report post Posted June 13, 2021 Haven’t yet found it but don’t need to know quickly. Took me some time to figure out how to get back here!! How in the world did you find it under bed under the floor? Maybe that would help me locate mine. 22 hours ago, elkhartjim said: Normally it is in the same bay as the power cord. My 08 Fleetwood Bounder ATS was under the bed. I had to remove the floor to get to it. Share this post Link to post Share on other sites
elkhartjim Report post Posted June 13, 2021 Raise your bed up. You can then remove the false floor. The ATS is there with the heavy gauge wires attached. Honestly, that was several years ago and I don't know how I found it. Share this post Link to post Share on other sites
yuccarob Report post Posted June 15, 2021 Thank you I’ll try that. I’ve been told to just listen when you disconnect shore power as the ATS makes a loud noise when it connects or disconnects but I have and can’t hear it. I am a little deaf so that may be why I can’t locate it. Also we have a lot of “stuff” under the bed!! Thank you for your in put. Share this post Link to post Share on other sites
