Jump to content
stargazr

Engine Temperature Gauge Works Intermittently

Recommended Posts

I have a Cummins ISL 400 CM850 engine, 2005 model. The temperature gauge does not work on engine start-up, then, as the engine heats, it will come on, and indicator needle bounces around, periodically. Sometimes the gauge will stop working after it has been working for a while too. Is there a relay in this system I need to look at? I have just purchased this coach, and have already replace relays for the air horns and a relay for the air dump. Engine temp sensor? Wiring problem? Bad Gauge? What would you experts look at 1st?

Can I use a meter on the back of the gauge to see if I am getting a feed from the sensor, or should I go ahead order a sensor? Any advice would be appreciated.

Thanks

Share this post


Link to post
Share on other sites

The coach/chassis maker generally select and install the gauge package, not the engine maker. So, contact Monaco for advice on troubleshooing-- they can walk you through identifying if this is a sender, gauge, wiring or interface issue.

Brett

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now

×
×
  • Create New...