woodlodge Report post Posted December 5, 2011 I have a 2003 Winnebago Brave that has the exterior paint/fiberglass (?) cracking. It is only happening on an area of about 5 sq. ft. on the passenger side front wall in front of the entrance door. The underside feels solid but the cracks keep expanding. So far I have done my best to cover the cracks with sealant to keep as much water out as possible but feel I need to do something more. Has anyone experienced this phenomenon and is there a reasonable economical solution? I have talked to a local body repair shop that said they could fix it but may not be able to match the paint and/or the graphics. A local dealer informed me that Winnebago pressure glues the fiberglass to the exterior and it is a major fix to correct my problem. Any information would be appreciated. Share this post Link to post Share on other sites
desertdeals69 Report post Posted December 5, 2011 If the cracks keep expanding it must be more that gelcoat cracking. If the fiberglass is moving it must be stabilized before gelcoat will not crack. The process is not cheap but may be required. Share this post Link to post Share on other sites
