Jump to content
Sign in to follow this  
rogerbet

Five-button Duo therm Controller

Recommended Posts

My A/C and furnace cycle on and off too frequently on zone 2. I've been told there is a setpoint adjustment under the cover, but I don't know how to remove the cover. Any help would be appreciated.

Share this post


Link to post
Share on other sites

Carefully remove the base plate from the Comfort Control Center . This may be accomplished by inserting a small screwdriver under the tab on the bottom edge of the front cover and gently prying. See FIG. 9 of the attachment.

CCC_Photo.doc

Share this post


Link to post
Share on other sites

Did you find the set point this is what mine is doing

I have a Coleman 5 button due them thermostat now that I need the furnace put it on zone 1 and furnace it lights and the fan comes on set the temp to 75 then in about 15 min. everything shuts off I know the temp never got to 75 it will not restart on its own turn the switch to off and back on everything starts up the shuts down again in about 15 min anyone now what is going on with the thermostat

if you got yours working what was it

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×
×
  • Create New...