dgross Report post Posted January 23, 2015 I have a 2004 Monaco Windsor with a Cummins 400hp. Am currently traveling and discovered large amount of exhaust fumes coming through the access panel in the bedroom. After investigating appears the exhaust pipe flange that attaches to the engine blower has broken due to a loose exhaust pipe support clamp. I have applied a temporary fix, but need to find a repair shop in the Houston area that can provide the fix. Any suggestions would be appreciated. Share this post Link to post Share on other sites
wolfe10 Report post Posted January 23, 2015 dgross, Welcome to the FMCA Forum. There are a number of OTR truck repair facilities on the east side of Houston off loop 610E. This includes the Cummins dealer for the area: Cummins Southern Plains. 7045 N Loop E Fwy, Houston exit Kirpatrick either direction, TX 77028. (713) 679-2220. Share this post Link to post Share on other sites
dgross Report post Posted January 23, 2015 Thank you very much. Will contact today. Share this post Link to post Share on other sites
manholt Report post Posted January 23, 2015 If your not a Cummins Club member, ask for app and pay the $25 before repair, you get 10% off bill! Carl Share this post Link to post Share on other sites
dgross Report post Posted January 24, 2015 Thanks very much for that tip. Share this post Link to post Share on other sites
wayne77590 Report post Posted January 28, 2015 I have used the Houston Cummins Southern Plains repair shop in the past and was very satisfied with their service. Share this post Link to post Share on other sites
