shuflid Report post Posted January 29, 2015 I have a 2003 Pioneer M-25TS6 travel trailer. The slide will only slide in. I can override it to move it out by hand but still only moves in. I have checked the switch and it is good. I understand there is a relay between the switch and the motor but I cannot find it. Can someone tell me where it might be located and what it might look like? Thanks Share this post Link to post Share on other sites
dickandlois Report post Posted January 29, 2015 shuflid, Welcome to the forum! You did not mention if it was a bedroom slide or some other location. Should it be the bedroom, best thought is under the bed or near the slide motor. There is a box that has some heavy gage cables running from it to the slide motor and the RV batteries. Manufactures often use the frame for the ground circuit. See if you can fallow the cables form the motor back to the box. The box could have 2 relays depending on who the supplier was. You could also have a low current wire issue-broken or loose connection in the circuit running between the control box and the slide In/ Out switch. Rich. Share this post Link to post Share on other sites
shuflid Report post Posted January 30, 2015 Could not find the relay so I put it in the shop. Thanks for the help. Share this post Link to post Share on other sites
