Jump to content

pweaver123@gmail.com

Members
  • Content Count

    10
  • Joined

  • Last visited

Posts posted by pweaver123@gmail.com


  1. Brett.....where do you find the valve? Would you look under the dash, in the front firewall area, or under the coach?

    I too FREEZE in colder temps......figured it was just the "nature of the rear engine beast."

    thanks

    Paul


  2. Sorry I haven't gotten back on make and model of RR.....we were traveling.

    I installed the Whirpool, side by side, 21.6 cuft refrigerator with the stainless steel finish and water and ice in the door. Model #ED2GVEXVDO1. As I understand from installers in Red Bay, AL where Tiffins are manufactured, this is the largest, best fit available. They've had good success with this refrigerator. As noted in my blog, we purchased the RR at Lowes. They even helped deliver it INSIDE my motorhome!

    I need more study on the inverter/battery issue before I move forward. I want to get with someone familiar with these electronics before deciding what to do. Do I go with AGM's, increase the number of batteries, get a dedicated pure sine wave inverter for the fridgeor replace my existing modified inverter, will there be charging issues while traveling???? These are all issues I'm investigating.

    We've been pleased with the performance of the frige remaining cold while traveling. We've found we can easily travel 6 hours without significant warming of the freezer or refrigerator box. Although, it is a problem if we boondock (without electric overnight).... we need to run the generator several times a day. We don't boondock that much, but would like to be able to, on occasion.

    Again, check out our blog if you are interested in reading about the install and seeing pictures. I have enjoyed sharing our RR project. Although it was a maintenance issue I would have like to avoid, we are so pleased with our new refrigerator.

    Thanks for your interest

    Paul Weaver

    www.wheresweaver.blogspot.com


  3. I recently replaced my Norcold 1200 with a Whirlpool residential refrigerator. I did the work myself and thought many of you might enjoy reading our Blog report on the replacement.

    See it here: http://wheresweaver.blogspot.com/2010_09_23_archive.html

    I'm doing the install in a couple of phases. The refrigerator was the first phase. My next step is to get a pure sine wave inverter installed. Then eventually replace the batteries. Wish I could have done all the phases at once but....$$$$$$$

    I actually found the replacement easy. Everything seemed to go as planned and we're enjoying the RR.

    Paul

    http://www.wheresweaver.blogspot.com

×
×
  • Create New...