dmbojangles@yahoo.com

I have had my Pressure Pro system since 2006 and have not had any major problems with the system. The few small problems has been handled by excellent factory support. The biggest problem occured when I transferred the system from my 05 Discovery to the 08 Revolution. The valve stems on the Revolution tag axle would not seat with the pressure monitors and leaked. I had to add a 180 degree extension to stop the leakage. I added this type of extension because the factory stems are rather long and wanted to turn the sensor back towards the rim. It would be nice to have a way to check the tire pressure with a gauge just to keep tabs on the system. I have found the reading on the monitor and my pressure gauge to be different by 3 to 4 lbs. with the monitor showing the lower pressure. You can remove the sensor and check the air pressure if you can reinstall the sensor within one minute as it looses it base setting after one minute and you have to go thru the base set up again. I would recommend the boost antenna if your unit is over 40 ft. I think you would be pleased with the Pressure Pro system and the people who make the system, they are great. Don Martin dmbojangle@yahoo.com 08 REV LE 42N 07 Saturn VUE Conroe, Texas