Allenire

Your post raises an interesting question for me. I'd always presumed that both front and outside rears were custom, but the fronts may be off-the shelf. There is nothing stamped into them, at least on the outside. I'd have to pull the wheel to check the inside thoroughly, although I'll at least do a flashlight check tomorrow looking at the inside with the wheel still mounted on the coach. The back, outside wheels have: "Alcoa Prototype Wheel T-DOT 19.5x6.75 3 2 01 20-270" stamped into them.

Wow, double strikeouts. Phoenix USA doesn't have anything that small, according to Jimmy. Pleasant guy, and seemed pretty interested in helping me out, but said they just didn't have one 7". Smallest was 8 5/8. The rep at RealWheels.com was stellar. Same story, nothing that small, but he seems pretty interested in helping me find one. He said he'd forward my request on to some others he knows. It's a pleasure when you find someone who has the time and interest for a special project such as this. Present company on this forum included, of course. Thanks for the input so far.

That looks pretty promising. I think you may have nailed it. I'll call them tomorrow and see if it's a match. Thanks for your help so far.

The folks at Hubcap Mike's were nice, and I ended up talking to Mike himself once the person who answered the phone realized that we were into uncharted waters. He said he had nothing like it, and suggested eBay searching on "Alcoa Wheel Center Caps". Definitely a nice guy, though understandably rushed. No luck yet on eBay either, so still looking.

I had a PM to try Sacramento Truck Center. Good advice, and Mike helped me out. Great guy, very helpful. They didn't have it, though I thought he deserved a shout out for his positive attitude and willingness to work on something off-the-wall such as this. So, the search continues.

My rims are custom one-offs from Alcoa. I've lost one of the center caps, and am hoping someone can provide direction as to where to look for a replacement. While the previous owner did have the rims made, I'm hoping he used a standard off-the-shelf center cap. Here are links to pictures of the remaining cap. www.pinetreecomputers.com/pacearrow/Centercap1.jpg www.pinetreecomputers.com/pacearrow/Centercap2.jpg www.pinetreecomputers.com/pacearrow/Centercap3.jpg Any suggestions would be most welcome. Ken