marvbailey@hotmail.com

He can start the generator and everything works fine. But when you plug in the 120 volts 30 amp house circuit it does not power anything. I checked power going in and have 120 volts. I know the 120 v shore power goes the inverter to run the 12 volts. The beakers check good. I even put power past the breaker on the 120 volt microwave circuit and no power. Is my trouble in the power inverter? Is there a switch that turns on the 120 volts? Explain how this circuit works please.-- the shore power.

My friend has a 1997 Fleetwood Southwind Storm. The generator works fine all powers. When he was running the two airs it kicked out the house breaker and no power after reset breaker. No power to all 120 or 12 volt. Tried to find what was wrong. Checked power at cord coming in 120 volts. No power to the breaker box either side. Put 120 volts to the breaker box and common could not get anything to work. Just tried this for a test. have no schematic. Does the neutral go to the power converter before it goes to the outlets or why didn't anything work when it gave it 120 volts. I guess I would like to understand how this circuit works. Thanks Marv