Dougswinnebago
-
Content Count
3 -
Joined
-
Last visited
Posts posted by Dougswinnebago
-
-
Wow! It seems that my circuit breaker is failing under a load!!! Power directly from the battery was the ticket. Troubleshot back from there. I was fixated on the fridge being the issue. Thank you very much. On to the next problemLOL!
-
12v power to board is good. I replaced the power board thinking their might be a board issue. New board=same problem! Still a C fault. With 12v wires disconnected the supply power is 12v strong. When the wires are connected to the power board the readings fluctuate from 8-ish to 10-ish volts?? It’s in a class A Winnebago 33V. With the engine running my supply voltage is 14v strong but the C fault again remains. Any ideas or suggestions??
Norcold N822 C Fault
in Systems and Appliances
Posted · Report reply
I believe the wire is good. Their was another 6amp circuit breaker so I pulled the wire off of that one and hooked up the fridge there. It worked beautifully! I have not tried to locate a new breaker yet. Is there a “best place” to get those kinds of things?