Jump to content
Sign in to follow this  
AndyShane

Freightliner XC Post-Delivery DIY Quality Checks Part One

Recommended Posts

I just took delivery of a new Newmar DSDP 4018 on the Freightliner XC chassis. So far, virtually no squawks for the house portion of the rig, believe it or not. Newmar fit and finish, in my humble opinion, transcends that of our hallowed Beaver Patriot Thunder

Several assemblyline glitches with the chassis are easily remedied but bear mentioning, so owners can watch for similar items on their own units. Two have surfaced during my initial crawl-under explorations.

First, an air line was bent across a nearby drain valve between the front tires, crimping the line/tube. This would fairly quickly lead to an air loss and possible roadside stranding. The remedy: completely drain the system, remove the tube end and dress, reinstall properly routed tube, secure.  The first image below shows the position, this defect.

 

Second, the steering shaft below the floor line is pinched between a condensate drain -- I love the way Newmar engineered these -- and another tube, setting the stage for eating through the adjacent dust boot and possibly later claiming both tubes. Easily offset to protect the tubes and boot. Second image shows the defect.

 

 

Screen Shot 2019-09-04 at 8.14.25 AM.png

Screen Shot 2019-09-04 at 8.19.13 AM.png

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...