stevezal@escapees.com Report post Posted April 26, 2010 Can someone shed some light on what causes the leg and trip counters to automatically reset on the Driver Display Screen on a 2008 Phaeton with a Freightliner chassis? I can reset them manually, but I find that they often reset when not desirable. I haven't been able to find this in the literature nor can I associate this automatic resetting with turning off the ignition or opening the door after turning off the ignition. Thanks. Share this post Link to post Share on other sites
Guest Wayne77590 Report post Posted April 26, 2010 If it only does it when parked for a few days, i'd say it was a weak battery and the voltage threshold is lower than what is required to maintain the settings. This will happen in my FxC when I park it for awhile without plugging it in so the converter can maintain a charge. Also, if you turn your chassis battery disconnect switch off, it may also reset your instrument panel. Good luck. Share this post Link to post Share on other sites
stevezal@escapees.com Report post Posted April 26, 2010 Wayne, Thanks for your response. Unfortunately, my leg counter has been known to reset when returning to my rig at a rest stop of 20 minutes or so. I haven't turned my chassis battery disconnect switch off yet. Any other thoughts? Steve Share this post Link to post Share on other sites
