kschoell Report post Posted October 31, 2023 I have a 2008 35H v10 gas Bounder with the Power Gear leveling system 140-1224 control. The jacks will not retract. No power to the touch pad. I have power to the controller from the house batteries. I have the trouble shooting guide from Power gear. When I check for power from the transmission switch at pin five on the plug there's no power from the chassis. Does anyone know where the switch, fuse, relay is located that sends the 12v to the controller from the chassis? I spoke with power gear tech. He said the chassis power to the controller comes in thru the transmission/ safety switch. Thanks Kirk Schoell Share this post Link to post Share on other sites
nixtom Report post Posted February 10 Just read your question. I'm sure you may have it corrected this already. Here is my response any way. In the right front storage compartment where the propane tank is- look at the shelf above the tank. There is a black 10x10 fuse box -- take cover off and there in the right hand corner there is a fuse # F11- 10 amp for leveling jacks. Share this post Link to post Share on other sites
