dschmees@coxinet.net Report post Posted August 28, 2010 I have a: 2001 Winnebago Adventurer 32V Basement Air Onan 5500 Generator. Ok, now the problem. When I'm on shore power (30A) I can run both compressors on the basement air when the temperature difference calls for it. When I run the gen-set, only 1 air will come on no matter what the temperature difference is. On the Intellitec, it shows that I'm on 'Gen-Set' so it is sensing that I'm getting something from the generator and that the amperage with the one unit running is 14 amps. All of the lights are on for the systems that it would shed if necessary. 2nd Compressor light is on. The circuit breakers on the generator are both on. Why am I not getting enough power to run them both. Is anyone else able to run both compressors on their basement air when on gen-set. Thanks Share this post Link to post Share on other sites
jmonroe Report post Posted August 30, 2010 Had a similar issue last year. It was in the switch box (controls power to rig from shore to genset). Share this post Link to post Share on other sites
dschmees@coxinet.net Report post Posted September 1, 2010 Problem solved. Yep, turned out to be the transfer switch. Share this post Link to post Share on other sites
Janvlen Report post Posted September 1, 2010 I have the same problem in my 1999 Triple E Signature. Thanks for the info, will look at the box.......CJV Share this post Link to post Share on other sites
