karls Report post Posted April 6, 2012 The Norcold 962 in our 1998 Born Free is not operating correctly on LP. The flame lights off immediately, but after 30 second shuts down with an A1 fault. I took a guess that it was the flame sensor thermocouple and replaced that to no avail. It is getting 12 volts and the gas supply is good. During the 30 second "proof of flame" period the igniter continues to spark even though there is a good flame. The thermocouple is positioned above the flame and gets red hot. Its connection is good. Anyone have a suggestion? How does one check a thermocouple signal? Thanks in advance. Karl Share this post Link to post Share on other sites
