Jump to content

  • Please note, Blogs are intended for stories about your RV travels.  Please post technical questions/comments in the forums located at:

    https://community.fmca.com/

Sign in to follow this  
Followers 0
  • entries
    8
  • comments
    9
  • views
    16079

Manabloc From Heaven Okay, maybe the other place, when careless owners are involved...

andyshane

Entry posted by andyshane ·

5918 views

I'd noticed that the plumbing manifold had some rusty hardware, and was dripping.

Actually, the first impression was that the Aqua Hot on the opposite side of the coach was dripping; but, good detective work and a drop light led me back to the true source: the Manabloc manifold.

I'll spare you all the trials of rebuilding the manifold, replacing connectors, etc. and skip to the end: someone had not properly winterized the rig, and there are tiny cracks from freezing in the top of the stack.

To the rescue came Louise Stout at Viega, who now owns the Manabloc name. She can be reached at 800-976-9819 Ext 220 and is one of those rare treasures we in the RV community love to have working on our side.

Foremost, she told me that creativity on my part to undo the damage done by RV technicians' cross-threading the cold water supply line would parallel their own level of poor methods: it turns out that the threads atop Manabloc manifolds are NOT the standard plumbing variety, that they are a proprietary pitch. She referred me to Pex Supply equpping me with a part number (46414) for the correct 1" female connector that joins up to 3/4" Pex.

Then, she looked up my manifold model number in their computer, pronounced it a rarity no longer in production -- heck, my RV is only a 2007 model -- and put in a work order for their shop to custom-build me its replacement. For $140, I get a new manifold and all outlet connections.

Maintenance Recommendation

Checking the plumbing manifold should be part of your monthly inspection routine.

  1. Open up the plumbing bay and inspect the floor for water. If power has been off the rig, rusty hardware might be the sole indication of leakage.
  2. Check under the rig for signs of long term leakage. Painted garage floors will have a telltale halo that indicates a leak/evaporation cycle.
  3. Touch the top of the manifold to ensure the recessed aren't harboring water.
  4. Check outlet fittings for security and leakage.
  5. Inspect manifold hardware for signs of moisture, eg rust.


Images

  1. Manabloc MXBD1B-14C2
  2. Years-Old Freeze Damage Atop Manabloc Manifold
View the entire Manabloc Plumbing Manifold album

2 Comments

Recommended Comments

andyshane

A followup: both the supply fittings and the manifold arrived in the same truck, at noon today.

The new supply fittings could be finger-tightened to a perfect seal; attaching each circuit was difficult only because I pried out each old gasket, replaced with new.

We got onto the road by 3PM, the phone rang at 3:05. It was Louise, checking up on our progress. She'd also worried that we would opt to go on vacation by different means, and the manifold would end up sitting on the front porch for a week.

That, my friends is top-shelf service!

Share this comment

Link to comment
thrushl

Andy:

THANK YOU so much for this information and the point of contact. I found your post when doing Google searches to find a new manifold for my coach, I must have an old one too as I can't find mine listed either.

That said, your post have now made my day and I have the exact person to call to solve my problem.

Thanks

Leo

Share this comment

Link to comment

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...