romer1

All the best to you. Had a quadruple in '90, 3 stents since then. Just do as docs say and rehab religiously.

Left one has a different shape due to driver door. Guess they could make any corrections though.

They're working with a company that does thermoforming, 3D printing and fiberglass work. It would help a lot if they had a fender to work with, but mine is only about a third of the fender. Also have a Winnebago dealer working with his body shop.

Guess that means you can't do it off a drawing????

Sent you a message, contact me.

Thanks for the idea and wakeup call. I have a friend with a 2002 Adventurer with the same fender. Never even thought of using that for a mold. Thanks. Merrill

Ray Thanks, tried that list many times. Most of those places are now out of business. Merrill

They're in agreement one has to be made. Just waiting for this estimate.

Here's an update. The fender is too large for anyone I contacted to do with 3D printing. Have found a place that may be able to do a vacuum form in ABS or use a mold for fiberglass. Just looking at most economical way.

Actually, the fender is a sheet of formed ABS, not sure how thick. The storage compartment doors have the sandwich construction.

Just talked to Winnebago, they're sending the dimensional drawing to have one fabricated.

Thanks Jim, I'm in the Chicago area. I know the old one is ABS. I have the back half as shown in the photo I attached earlier. Drivers side has a door which somewhat changes shape.

Herman, Thanks, just called them and front fenders are gone. Merrill

One: Merrill Weber Two: USNR-R Three: 1961-1968 1 year active, rest reserves Four: E-5 electronics tech Five: Anti Submarine warfare P2V's Six: NAS Memphis (Boot camp, school) NAS Willow Grove with trips to Roosevelt Roads & Norfolk

That's what I need. Have contacted them 2x, They also have 4 Adventurers there, yet tell me they have nothing. Thanks for the link tho.

Was at Winnebago March 30th for some repairs. That happened on way to Forest City. Part is obsolete and they don't have tooling to make one, thus the search. My local RV mechanic will be doing repairs. Hadn't thought about insurance claim. That wouldn't help with the part.

Need a right front fender for a 2000 Itasca suncruiser 35U. Have tried Colaws, Visone and AZ rv parts with no luck. Anyone aware of any other places that might have one? Maybe there's one sitting in someone's yard waiting to be parted out? Checked Winnebago customer service, part is obsolete, tooling no longer available, can't be made. 2000-2002 Adventurer / Suncruiser use same fender Thanks