Jump to content

ClayL

Members
  • Content Count

    213
  • Joined

  • Last visited

  • Days Won

    1

Posts posted by ClayL


  1. We have the FloPure Mark 8000.

    Cost is $240 and includes shipping. Regeneration is done with a box of common table salt.

    It is similar to others like the "On-The-Go" water softener which is the one Camping World sells I believe.

    Both are 8000 grain units which means they will last longer without requiring regeneration. Some folks use "Water Sticks" but the biggest one of those I have seen is only 1500 grains.

    In AZ where we spend most of the winter the water hardness is about 50 grains per gallon. That means that an 8000 grain unit will soften about 160 gallons before needing to be regenerated. Since we use about 13 gallons of water per day we have to regenerate every 12 days or so.

    In another place we stay with a water hardness of 20 GPG, the softener will last about a month.

    To regenerate it I pour about three cups of water out of the outlet, take the cap off, remove the strainer, pour in the box of table salt, replace the strainer and cap, let it sit for a couple of hours then flush it for five minutes.


  2. A great thing about crossing Kansas on I70 is stopping in Russell and getting that humongous rib eye steak at Meridy's Steak House.

    It's right off I70. There is a Passport America RV park almost next door.

    Grand Junction is a good place to stop after you cross the Rockies. RV Ranch is a decent place to spend the night.

    We will be here in site 21 for most of the summer. Come say howdy if you stay here.


  3. My Onan Marquis 5000, gas engine runs but is not producing electricity.

    Please offer a simple remedy as I do not want to nor have the money to pay $2000 to Cummins for service.

    It is in a Fleetwood Pace Arrow Vision 35'. 2000 model year on a Ford F53 V 10.

    The genny looks to see if it is producing voltage and if not will shut down. Since it is running I suspect one of the two suggestions above - the automatic transfer switch or an open breaker is the answer


  4. Save your money. Use water and water alone. At various times I have tried every "system". The system that works best is water.

    I agree.

    The waste tanks are a sealed system except for the roof vent and if you have odors that are not being drawn into the RV from the roof then you have a problem that needs to be fixed.


  5. FWIW Jake brakes come in three flavors nowadays.

    1) compression release brake

    2) bleeder brake

    3) exhaust brake

    For explanations on how they work go to their SITE and look under "Technology" at the top.

    The following came from the owners manual on the last motor home I had. It had a P30/32 chassis. It might be helpful to the OP who said he had a P30 chassis as I recall.

    When Using Transmission to Brake.

    Maximum Speed in First Gear is 30 MPH.

    Maximum Speed in Second Gear is 40 MPH.


  6. Yes it is normal. In fact my chassis battery will discharge in about 3 weeks due to parasitic 'keep alive" drains for the engine and transmission computers.

    I would keep it plugged in and use a BatteryMinder Plus to keep the house and chassis batteries charged. The BatteryMinder can keep up to 4 batteries chaged and since it is a float charger it will not hurt the batteries if left connected for long perions of time.

    Although the converter will keep the house batteries charged when you are plugged into shore power you will have to check the water often because the converter used by Winnebago is not smart and can boil the batteries dry. My manual says to use the battery disconnect switch if the motor home is plugged into shore power for extended periods of time.


  7. While acting as a gate keeper your lifestyle is going to be pretty limited if you don't have electricity. Are you going to have to run your generator all/most of the time? If so how will you refuel your motor home? The generator will probably use about 1/2 gallon per hour at half load.

    You can use an inverter to change the 12 vdc from your battery to 120vac so you would not have to run the generator all the time. There are some items like AC and electric heaters that won't be practical to use even if you have the requisite inverter and battery bank.

    Do you have a way to dump your waste tanks and take on water where you will be staying?


  8. One thing that I don't like about Dish is that the guide time is your service address time. My buddy talked to them about that and was told that he would have to call and have them change the time. That's not real convenient for folks traveling all over the US.

    With Direct I can change the time in the receiver menu.


  9. Most people make sure they have plenty of liquid in the gray water tank - dump the black, close the valve and then dump the gray so the liquid washes the hose out. I close my gray about three days before I plan to dump the black and it is almost full at that point.

    The odor may be coming in from the roof vent. A vent pipe device that pulls air of the tank when any breeze is present might help. Take a look HERE

    You can use any toilet paper you want whether it says septic safe or not. If it doesn't dissolve it will flow out with the waste anyway.

    Most brands dissolve fairly quickly in any case.

    If you want you can choose one of the ones below that dissolve fast.

    Brand...........................................Dissolving Time in Seconds

    (lowest is best)

    Charmin Plus 1-Ply..................................9

    MD 2-Ply...................................................9

    Coronet 2-Ply..........................................12

    Angel Soft 2-Ply......................................12

    Scott 1-Ply..............................................17

    Soft 'N Gentle 1-Ply ...............................18

    Soft Weve 1-Ply.....................................20

    Marcal 1-Ply...........................................20

    Soft 'N Gentle 2-Ply...............................21

    Seventh Generation 2-Ply.....................21

    Quilted Northern Super 2-Ply ...............69

    Charmin Ultra 2-Ply ..............................77

    Cottonelle 1-Ply ....................................96

    Charmin 1-Ply .....................................180

    The TPs with an Excellent disintegration rating from a Aug 2000 Consumer Report article are:

    Albertson's Soft Choice Ultra

    Safeway Select Softly Ultra

    Quilted Northern Ultra Soft

    Quilted Nothern Soft Prints

    Target

    Kroger

    Angel Soft

    Charmin Plus with Unscented Natural Aloe

    SoftWeve

    I understand there is a later consumer Reports study out but I don't have a copy.


  10. We have used Walmart for 10 years of full timing and they can transfer the precriptions within their system. There are a couple of exceptions with GA being one of them.

    NY state has some sort of rule that only lets it be filled once and then they want a new local one. That's what I recall anyway.

    We have had no problems anywhere else.


  11. You can download a trouble shooting guide HERE that might be helpful. When Kwikee had their own web site - before they were bought by Actuant and folded in with Power Gear - the guide (2005StepTrainOL.pdf) used to be availble on the site. Power Gear has some of the Kwikke documents on their site but not this one.


  12. The Onan Generator Handbook says

    "Q: Can I use synthetic oil in my generator?

    A: People use synthetic oils because the general opinion is that they can be left

    in the engine longer than regular oil. However, if you decide to use synthetic oil

    in your generator the maintenance time intervals given in the operator manuals

    must still be followed."

    The Handbook can be downloaded here http://www.cumminsonan.com/www/html/Common/pdf/rv/F-1123%20-RV-Generator-Handbook-2010.pdf


  13. I may be missing something but I just drew out the simple two switch circuit (2 spdt switches) for allowing either of two switches to operate a light fixture and I don't see why an LED can't be used instead of a fluorescent fixture. There is no polarity reversal and that is the only thing I can see that would cause a problem.

    This is the diagram:

    3wayLED.jpg

    Note: I left the current limiting resistor needed to keep the LED current at the right level out of the diagram. It didn't seem to be pertinent to the issue.

×
×
  • Create New...