skipandglor

I also have a 2008 Chrysler with the six speed trans. I had the Remco LP-1 pump system installed where I purchased the MH. My first trip out was problamatic as I would get alarms after 2 to 3 hours of driving which would subside if I pulled over and stopped. In Branson MO. I had the wiring and plumbing checked for accuracy and was told all was correct. I later contacted Remco who told me that I would need to be sure that ATF+4 fluid (full synthetic) be used and to have the level reset to 40 to 50 mm. I went to my Chrysler dealer and had the fluid and filter changed with the level set at 45mm. The special tool needed is a dipstick, a dealer will have one or you can buy one online if you wish. The next trip out I still had alarms but lesser severity. I found that if I pulled over and started the engine on the toad for 1 min. and then kept the speed at 55 MPH or less I did not get an alarm. I have another request for help from Remco posted as 55MPH on a 70 MPH interstate can be trouble. I usually prefer 5 MPH below posted limits to avoid having to pass others as often.