Jump to content

murmanone

Members
  • Content Count

    13
  • Joined

  • Last visited

Posts posted by murmanone


  1. I have some good and some poor copies of wiring diagram pages  for a 95' Safari.  I don't recall which model they are for, but they were not for my model. However, I found that they were very helpful.  If you are interested contact me. I know a lot about my 37' Sable which is a 95' model year. I have overcome several electrical issues over the years with the help of these diagrams.


  2. Hi, I'm looking for a shop that can rebuild or exchange my master cylinder and calipers in the Grants Pass or Medford, Oregon area. The system is functional now, but the master cylinder rod boot is cracked as are the caliper boots. Thanks


  3. Hi,

    I have a 95' Safari Sable and I am preparing to install a 7 spade trailer connector to the RV. I have a 6 pin connector that was used to tow a toad so there wasn't a need for electric brake or 12vdc.

    I am asking if anyone knows if there is a brake wire in the harness or possibly terminated in the engine compartment. I would think that this phantom wire would be 10ga. to accommodate the 40' or so length.

    Thanks in advance.


  4. Hi, I have a 1995 Cummins C8.3 engine in a Safari RV that I am changing out the coolant. I am concerned that I might not get all the air out of the block. I can't find and petcocks or removable plugs to vent out. I did find drain at bottom of oil cooler. Can anone help me out.

    Thanks,

    murmanone

×
×
  • Create New...