Jump to content

dlrmp2008

Members
  • Content Count

    3
  • Joined

  • Last visited

Everything posted by dlrmp2008

  1. The grey portion's length is 9/16th inch, diameter is 3/8th inch. Metal portion's length is 1/4 inch, diameter is 5/16th inch. Diameter of the 2 locking ears is 13/32th. Is there a spring that the fuse contacts, on the end that the fuse holder is not connected to, or anything else inside the fuse port hole? Thanks again for your help, Dennis
  2. Here are some pictures of the fuse and fuse holder i have. Don't know if they are original or not. When I put the fuse in the fuse holder and press on it, there is a little bit of spring resistance. But when I put fuse holder with the fuse in it into the fuse port it does not seem to make contact with anything else in the bottom of the fuse port. Overall length is 1 11/16th inch with fuse in fuse holder. Is there supposed to be another spring or contact hooked to the other end of the fuse? Or is there another part of the fuse holder that I am missing. Have been through everything I can find at HWH and cannot find a picture of the fuse and fuse holder, and don't want to order them if they are the same thing I have now..... THANKS FOR ANY HELP I CAN GET, DENNIS
  3. The 5 amp fuse in the control panel on my HWH 110 series leveler w/o dump does not seem to be connecting to anything when you insert fuseholder and fuse into the fuse port. Is there supposed to be a spring or something in the bottom of the hole that I could be missing?
×
×
  • Create New...