Jump to content

RexCoach

Members
  • Content Count

    16
  • Joined

  • Last visited

Posts posted by RexCoach


  1. On 5/11/2018 at 7:48 AM, rsbilledwards said:

    Late to the party but now back home after 9,000 miles of pure unadulterated freedom of being on the road since the first of January. Typical mileage towing the Chevy Tracker 3,300 pounds, rolling between 62 and 65, RPMs in the 1325 + - range, C12 425 HP CAT, Allison 4060, weight under 31,000 pounds, so 34,300 + - pounds equalled 8.5 MPG average. One 300 mile section across Texas on I 20 we saw double digits as high as 15 MPG. Add in the propane and we averaged 9.6 with the 1 gallon per 100 miles as advertised when I had it on. Some what of a guess as the frige was useing it too and for a while it used more than it should have. I filled the tank 3 times, about 100 gallons. 

     

    That is amazing. The highest mileage I've ever seen or heard of in a Cat 425 is 6 MPG with 4.5 MPG being very common. 

    A friend of mine used to say his Cat 425 meant 4.25 MPG! I will link him to this website so he can possibly triple his mileage. I know he will be appreciative.

     

     


  2.  

    I have to admit I was a little worried when the Seattle Times was blaring the headlines of a FMC shootout with two people being killed.

     

    Turns out it was the Family Motorcycle Club in the Seattle area.

    Thank you fellow FMCA members for being so mellow about our club.

     

    Whew.............

     

    :mellow:

     


  3. Some things never change.

     

    I was a long haul truck driver in 1979. Just north of Phoenix, the clutch in my year old Freightliner packed up. I made it back to the only Freightliner dealer in Phoenix at the time. They quoted me $500 just for the Spicer clutch/pressure plate, take it or leave it. I borrowed their phone book, called the Spicer dealer in town, called a taxi and $220 later, including the taxi ride, (a long cross town drive) I had a new clutch and paid Freightliner around a $100 to install it. Shop labor was around $32 and hour or so. The mechanics thought it was great that I got such a deal on the clutch instead of being bent over at their parts counter.....


  4. We partly financed a 17 year old Country Coach. We found a few banks to be inflexible in regards to the 10 year rule. 2 local credit unions were more relaxed. The problem we had with an older coach is the unrealistic, IMO, Blue Book pricing that had our coach listing for a scrappers price. The credit said they would consider an appraiser so for about $125.00 we had a complete appraisal done and the CU was completely satisfied with that, as was the insurance company.

    With all that being said, you could consider getting an appraisal so you have (possibly) a more realistic value, on paper, or your coach that you can use with a lender, an insurance co, and a prospective buyer.

     

    Good luck!

     

     

     


  5. There is a parking lot directly across from the cruise terminals in SEA. Do a little searching for Port of Seattle, long term RV cruise parking, and you should be able to find a phone number. We parked our car near the terminal that accommodates Princess and Holland America lines, long term, fenced, no problems. I am sure they have RV parking too, or at least they did 2 years ago when I was researching cruise ship parking lots in SEA.

     

    Good luck


  6. On 4/20/2017 at 6:35 AM, cwswine said:

    Well I check out the thread that was posted here to and found a company called "Dave & LJ's in Woodland, WA." funny thing is we have booked a site at the Columbia River Front RV camp grounds in Woodland Washington for our high school reunion in Longview Washington in July and we are looking to have our couch replaced with theater seating.  Wewill have to check them out LOL

    We had work done there on a prior occasion but the last time we used Dave and LJ's the oak divider between the dinette and (new) couch was deeply scratched. They just could not believe it until their installer fessed up to it. That and their uncaring attitude towards repair the damage, led us to Never use Dave and LJ's again. Since our incident I have met two other owners who sustained damage their coaches with similar attitude after the fact. We had spent over 5K and kinda expected a bit of CS after paying top dollar.

     

    YMMV

     

    Cheryl


  7. Wow, 58 posts before mine.

    My semi had Stemco hub covers. There was no need to suck the oil out of the plug hole, there was a drain plug on the side of the casting. The same drain is visible on the pic of the Volvo that somebody posted above.

    My Country Coach has the same set up. There is no need to suck or plan on how to drain the hub, it has a drain plug on the side of the casting. Takes an Allen head wrench to remove it. Very easy to do.

    Hope this helps.

×
×
  • Create New...