richard5933 Report post Posted May 31, 2019 We have a large rubber hose connected to our fresh water tank which is used to drain the tank. It has been annoying since it tended to flop around and not stay put. I looked for some type of clips to hold it against the partition next to it, but didn't find any. Then I remembered I had some Kydex left over from a knife sheath project. I was able to cut the Kydex to size, heat it, and then mold it to fabricate a few clips. Works well and now the hose is neatly tucked away. Thought I'd post this to spark other creative uses of Kydex plastic. Share this post Link to post Share on other sites
