goodthief Report post Posted April 4, 2009 I have a Beaver Marquis and some of the ceiling lights that are mounted in the wood need replacement. The book says a quarter turn will remove the glass. I can not open the darn thing. I tried using rubber gloves to aid in the friction, but still no luck. Anybody have an answer? Share this post Link to post Share on other sites
lpfdon Report post Posted April 4, 2009 I believe I have the same lights in my Safari. Yes, a counter clockwise turn does remove the glass. A dead fly was in one of mine, so I did remove it for cleaning. My light fixtures are on a spring-loaded clip so I can pull them slightly out of the ceiling to get a better grip. Share this post Link to post Share on other sites
PIPEWRENCHGRIP Report post Posted April 6, 2009 I have the same type of lights in my New Monaco. I just replace a bulb in one of them. I had the same problem untill I discovered I could pull the fixture down a bit and then remove the lens.. Putting in the bulb was a bit awkward with the two little prongs to line up. Tilting my head upside down and trying to see what I'm doing with bifocals. Good Luck Bill Share this post Link to post Share on other sites
