deanbam03flyrnes Report post Posted April 13, 2009 Reading the installation manual for the Demco base plate, it appears that after the base plate is installed the plastic front-end parts (grill/fascia/bumper) are pushed forward of their original position. Does anyone have experience with the Demco installation on a 2008/2009 Vue? Share this post Link to post Share on other sites
itzmeharv@aol.com Report post Posted April 14, 2009 Reading the installation manual for the Demco base plate, it appears that after the base plate is installed the plastic front-end parts (grill/fascia/bumper) are pushed forward of their original position. Does anyone have experience with the Demco installation on a 2008/2009 Vue? Dean, I have a 2007 Vue the base plate was installed by pros at Cal Western, in Norwalk, CA. I did read over the instructions many times and you may have overlooked the trimming or sawing of small arears to allow the thing to fit. The guys at Cal Western ar great they might tell you what you need to do. If you can't locate them on the WEB visit itzmeharv@aol.com and Iwill look up the landline number. Harvey Share this post Link to post Share on other sites
