joseosanchez Report post Posted September 26 Hello Everyone, I am new to the forum. I had my RV serviced this past week (changed the bell cranks) and as I picked up the RV I noticed that the ABS light was on. I have a reader for ABS but it does not include workhorse (iCarsoft E660). Do you know which ABS reader will read the codes for a workhorse chassis? I have googled for an answer with no avail. I appreciate your help as I want to troubleshoot the error. Thank you Share this post Link to post Share on other sites
fmcastaff Report post Posted September 26 Hello and welcome. Workhorse.com (https://workhorse.com/contact/) lists support information for legacy products -- chassis produced prior to 2012. I wonder if either of these sources could help: https://www.ultrarvproducts.com/ https://workhorseservice.com/ Share this post Link to post Share on other sites
joseosanchez Report post Posted September 30 Thank you for the help. I called ultrarv and also check other forums and what I found is that the GM tech II is the only scan tool that can read codes for other modules in the workhorse chassis. Does anyone know of a good GM tech 2 clone tool as the original tool is not available anymore. I found several online but not sure which is the recommended one or the ones that actually work. Thank you Jose Share this post Link to post Share on other sites
