Jump to content
Balmer1962

Hydraulic jacks stuck down

Recommended Posts

On the end of each solenoid is a manual valve opening, it will either be a T-handle, hex nut, or plastic flip lever. Regardless of type, open it 4 turns  or flip the handle 90° to open the valves of the 4 solenoids. The springs will retract the jacks, then close the valves to snug or flip the lever back to the original position. 

If you have jacks with no springs, use a pry bar to push the jacks to fully-retracted then close valves.

As to service, determine your model# leveling system,  then follow the troubleshooting section directions in the service manual. You'll find the service manual by googling your model# and service manual.

Edited by rayin

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now

×
×
  • Create New...