hopmarcollinfam Report post Posted October 30, 2010 Bill D, or any other automotive electrician on the forum, Could use a little HELP here! I installed some Projector Beam headlight housings,and HID bulbs and ballasts, in the place of the H4656 low beam bulbs. It was pretty much "Plug and Play" the kit I bought had the same 3 lug electrical hook up as the stock sealed beam lights. The low beams are fantastic but as soon as I hit High beams, the Highs come on and the LOWS CUT COMPLETELY OFF! that's the PROBLEM I'm having. It appears that the stock 3 lug elec connection includes a ground, a 9V hi beam source and the 3rd is an 11V low beam source. Does anyone know how I can wire these HID bulbs to stay on all the time irregardless of hi/low beam switch position? All and any help appreciated, thanX in advance. HF Hop Collin Share this post Link to post Share on other sites
Jon796 Report post Posted October 30, 2010 Check with the company that makes them before changing a thing. They may have made it that way because of heat. Those new types of bulbs you installed give off a lot of heat. I know of someone that did what you say you want to do and it melted the plastic headlight housing. Share this post Link to post Share on other sites