Has Anyone Replaced The Inverter On An Itasca DP

[huberta]

I have a 2004 Itasca DP and would like to replace the inverter with a new Magmum 2000. I have this inverter in my boat and am very pleased with it. Has anyone done this and did you have any problems?

[wolfe10]

As long as you are replacing an inverter with the same size (amp) inverter, should be pretty straight forward. If this is a larger inverter than OE, you will need to verify that the OE wire and fuses (12 VDC and 120 VAC) are of appropriate size as recommended for your new inverter.

Obviously, you will need to consider the footprint and other dimensions vs original and also ventilation if this is a larger output inverter.

Safest would be to go through the installation manual for the new inverter and compare every spec to what you have (mounting location, 12 VDC wire gauge and fuse size an 120 VAC wire gauge).

Brett