Sterling Report post Posted September 4, 2013 Want to find ignition 0 fuse or can disconnect be installed at battery Truck is 2008 Silverado Truck pulls nicely behind motorhome. Graham Share this post Link to post Share on other sites
washbob Report post Posted September 4, 2013 I used to tow a 2008 Hummer H3 and I did not have to disconnect the battery or pull a fuse. No mileage showed up on the odometer when being towed. It was real simple, shift transfer case into neutral, put in park, remove key and go. I'm considering towing a 2014 Silverado, but just noticed a service bulletin issued in June 2013 on flat towing. They now call for removing the negative cable at the battery & leaving the key in with the ignition key on accessory. I don't like the additional steps now required and I think it would be a real pain losing all your presets everytime you disconnected from the battery. Share this post Link to post Share on other sites
desertdeals69 Report post Posted September 5, 2013 I tow a 99 Silverado 6 cyl 5 speed. I pull the ignition fuse but I have forgotten a couple of times and there was never any milage added. Share this post Link to post Share on other sites
BulShippr Report post Posted September 15, 2013 I have a 2009 Silverado 4WD that I have towed since new. My owners manual covered this subject completely. I suggest that you read it and follow it. Setup on mine is transfer case in neutral, Transmission in Park and keys are removed and in my pocket. My lights are fastened into the motorhome. Share this post Link to post Share on other sites