astmi Report post Posted December 6, 2013 Would anyone be familiar with nanostation ? This is a wifi signal amplifier. I bought one and can not install it. The supplier does not reply to requests on its website. Share this post Link to post Share on other sites
kaypsmith Report post Posted December 6, 2013 Which model do you have? Did you get the Poe injector with it? Kay Share this post Link to post Share on other sites
kaypsmith Report post Posted December 6, 2013 Here is the link for the setup instructions, (http://dl.ubnt.com/docs/M_Series_Beginner_Guide.pdf). If you don't already have the instructions, simply cut and paste into your browser's address line. I asked if you have the Poe injector, also. This is how it gets power to run, which requires 12volts to operate the unit through the Ethernet cable. I have e-mailed my phone numbers, will be up about 30 more minutes. Call me if you need any help. Not surprising that the company hasn't replied, sometimes takes weeks for that to happen. Good luck, Kay Share this post Link to post Share on other sites
astmi Report post Posted December 6, 2013 Thanks. Will try that. Share this post Link to post Share on other sites
