rolanddubree Report post Posted June 1, 2014 My 2001 Beaver coach has and 8 air bag Magnum suspension system. How is proper air bag pressure setting determined and set? Is it at a fixed pressure or via raising or lower pressure to set motor home ride height? If ride height is front to be slightly higher or lower than rear? Where and how are adjustments set? Share this post Link to post Share on other sites
dickandlois Report post Posted June 1, 2014 The ride height is set by adjusting the ride height control valves. One needs the proper measurement points and adjustment information. Your chassis maker (Monaco in your case) can tell you the proper ride height-- normally measured from a given point on the chassis to given point on the axle. You might give Monaco service a call to see if they can supply the proper information for your coach. Technical Support, Parts and Warranty Assistance: @ 877-466-6226 Rich. Share this post Link to post Share on other sites