Jump to content
LandB

Black Water Tank Flush

Recommended Posts

I have a 2007 Monaco Camelot and I can no longer add any water using the black water tank flush connection. It has worked in the past but no longer. I believe there is a check valve in the line somewhere, but not sure where. I have removed the hose connection/plate and it is not on the backside. I have been told it may be in the cabinet under the bathroom sink, but doesn't appear to be there either.

I called Allied Recreation Group (Monaco), but they have not called back so far.

Any ideas would be appreciated.

Larry

Share this post


Link to post
Share on other sites

I had a similar problem with our Exec. I removed the spray head and cleaned the holes with a thin wire. With spray head removed I verified flow before re-installing. It has worked fine since.

Share this post


Link to post
Share on other sites

On ours the spray head is at the opposite end of the tank from the dump valves. The panel over this end of the waste tanks has two latches underneath. I don't know that yours is the same but it should be similar.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...