brown774 Report post Posted October 7, 2014 Any recommendations on products to lube or condition these seals. 2007 Monaco Diplomat. Gaskets look dull and minor checking. Share this post Link to post Share on other sites
dickandlois Report post Posted October 7, 2014 Bill, From your description, think you might try to spray some silicon on a cloth and wipe down all the seals. This would clean them and hopefully add some new life. I clean mine each year with some Protect-all and then wipe them down with a light coat of silicon. Rich. Share this post Link to post Share on other sites
jc21014 Report post Posted October 7, 2014 How does one reach the external rubber horizontal seal across the top of the slide as most have a cover of sorts. The same seal, but on the inside, could probably be reached when the slide is inside, I believe. Share this post Link to post Share on other sites
dickandlois Report post Posted October 9, 2014 jc21014, I use one of the extendable poles, like one uses to wash the coach. With the Velcro attaching system. Spray some silicon on a ends of the attached cloth and run it back and forth along the seal. This does require the side to be extended and the use of a 6ft. ladder in my case. Carefully working from both ends of the slide. Rich. Share this post Link to post Share on other sites
jc21014 Report post Posted October 10, 2014 Thank you. Just happen to have one of those and will put it to good use. Share this post Link to post Share on other sites
