jamestouchstone Report post Posted January 14, 2016 We recently up graded our TV to hd and now need to install the SWM Dish by Direct TV. Can I use the existing power supply from the original KVH dome? Share this post Link to post Share on other sites
obedb Report post Posted January 14, 2016 You will need 120 volt power for the interface box and to plug the power inserter into. Those components really need to be inside . The interface box is used to deploy the dish and you wil need a clear view of the readout as it controls the dish. The power inserter needs to be kept dry. The four way splitter I believe is weather proof, but I keep ours inside also. On the electronics discussion site, I posted a description of my adventure installing the dish/ date 6Sept 2015. It is a wonderful piece of equipment for HD tv. We really enjoy ours. Share this post Link to post Share on other sites
jamestouchstone Report post Posted January 14, 2016 thanks for the prompt reply, your info on the electronics site was also helpful. thanks again. jim t. Share this post Link to post Share on other sites
