sunlover19
-
Content Count
61 -
Joined
-
Last visited
Posts posted by sunlover19
-
-
Don't have the manual, l guess l will Google it for my model l have done it both ways but don't want to screw up anything
-
Getting confused on the proper procedure to lift the jacks, should l start the engine and let the air ride lift the rig and then retract the jacks or push the store button and make sure all jacks are up and stored then start the engine to fill the air bags ? I have a 40 ft diesel pusher no tag axle, HWH hyd system, Freightliner 05 chassis
-
4 P's. P*** poor prior planning
-
I think I may just replace it anyway and check the anode rod at the same time since the coach is 15 years old, I think the anode rod has been replaced when the PDI was performed when we bought the coach 2 1/2 years ago.
-
Thanks for the great information, I will pull it out and check it when we get ready for the next trip.
-
Can you use a standard pressure relief valve from home depot or Lowes or is there a difference between home or RV ones, current one shows 150 psi /210 degree rating.
-
Crappy wet day here in San Diego but will be nice for our departure tommorow to Village Palms in Hemet CA
-
We are not at a campground but with the holidays coming we don't have a trip till December 5th to Golden Village Palms -Hemet CA
-
We are considering going to the rally in January but may stay nearby and come over by car for a day at the fairgrounds
-
Mark and Terri we retired in the sun from many years in Seattle, we have been rving for over 4 years ( not living on our coach ) and travel southern California, Arizona, and Nevada mostly.
We have a 2005 Mandalay model 40E diesel pusher, we just recently joined FMCA.
Our favorite place is The Oasis in Las Vegas.
Departure procedures for raising hyd. hwh jacks
in Leveling
Posted · Report reply
According to what l read it states... with slides all in start engine and press the store button.