cvdm@msn.com

Thanks Brett, I have the same set up as Jim. Cat CFE3126 engine with a Freightliner XC chassis and one filter with a clear bowl, no pump. It is the correct micron filter that you have been talking about. I have try at least 5 time to try and start it. Does the fuel pump run with just the key in the on position? The Manual does not say anything about final air bleed. Chris

Hi Brett, I am having the same problem. I devised a way to pressurize the fuel tank with 25 PSI. I do not have a way to let out the air out of the filter other than the drain at the bottom and a plug, or too disconnect the outlet line (this is what I did and it had no fuel in it). When I pressurized the tank I got a good flow of fuel. So the line is primed to the filter but I still can not get it to start. Can I try starting it while I have the tank pressurize to get it to the pump? Thanks for all of your advise. Chris