Jump to content

bjeff

Members
  • Content Count

    5
  • Joined

  • Last visited

  1. Thanks Rich and Herman. I'll contact Monaco first. My liners are still intact so I should be able to use them as a guide to drill the holes to reattach. Thanks again.
  2. I need to replace the rear wheel well liners on my Monaco Dynasty. Can anyone tell me where I can purchase them or the plastic liner material so I can make my own? Thanks in advance.
  3. Thanks for the info Leo. I am having a similar problem with no DC to the main fuse panel in the bedroom of my 1998 Monaco Dynasty. After tapping on a few relays in the rear main DC panel, I thought I heard a relay click in the drivers side front DC panel outside the coach. Sure enough, the lights came on inside. I then turned the DC switch at the stairway off and back on and lost DC power again. After tapping in the back again the lights came back on. My question to you, Leo, is was the corrosion you cleaned off visible? And did you hear any relays operate after cleaning the terminals. Thanks for anyone's help. I'm a new member and think the forums are great. B.J.
  4. I am replacing all 6 tires on my 1998 Monaco Dynasty which has Bridgestone R250 295/75R/22.5 on it now. I found out BFGoodrich has been owned by Michelin since 1980. The replacement tire is a 275/80R/22.5 with a 40" diameter & 10.9" width. I found a pretty good buy for 6 tires out the door for $2922.39. That includes balance beads in each tire. Does anyone have experience with these beads. I appreciate the forums and have gotten plenty of good info. Thanks, Bjeff
  5. This is my first post on your site & I appreciate all the input I have seen. I had the recall done last year on my 1200 LR w/ ice maker. I checked the unit yesterday and had no power to the door panel. I was overseas when the recall was done and am not sure what was replaced. I have 120 volts to unit and there is a red light burning on a clamp on relay (I suppose that's what it is). I also checked the 3 amp fuse & it is OK. This was while running the generator. All other a/c appliances seem OK. Any help would be greatly appreciated. I apologize for taking up your time. I had only read first page. Second page gave me things to try. Thanks for your time. Thanks. bjeff.
×
×
  • Create New...