Jump to content

desertdeals69

Members
  • Content Count

    2589
  • Joined

  • Last visited

  • Days Won

    11

Posts posted by desertdeals69


  1. What I have used is a couple of camping sleeping mats available at Wal mart for about $7 each. They are about 1/2 inch thick and about 20 inches wide and 72 inches long. Cut out where the towbar brackets come through. I secure to the front of the vehicle with 6 foot bungie cords. I have traveled coast to coast, border to border, including a month in Alaska for the last 12 years and never had a mark on the front end. I towed a Chev Silverado about 120,000 miles.


  2. The engineer I spoke with said that over filling and disconnecting the cooler line was the way they do it at the factory. It might not be the way they want the average do it you selfer to do it. This is the least expensive way to change almost 100% of the fluid the first time. We always degrease the fittings and hose before disconnecting to prevent dirt contamination.


  3. Its possiblle to feed audio from the satellite receiver to the surround amp through the coax or optical cable.You can run the sound from your bluray player the same way. Remember if you run video thru any cable but hdmi or cat 5 the picture quality will suffer. You will no longer have HD. The only problem with running the hdmi through the surround amp is that you must have the amp on all the time. If you are running on inverter that is a lot of current draw. The amp will draw about 3 times more current than an LED LCD HD tv.


  4. When I changed to TranSynd I asked one of the engineers at the Allison booth at the FMCA convention how he would do it. He said to fill the trans 3 quarts over full and disconnect the cooler line and start the engine until 3 quarts comes out and shut off the engine and reconnect cooler lines then run and adjust the level. This would replace the the fluid in the converter. This was several years ago. The filters are also changed.


  5. I remember the old system, I believe it was Thermo San, we disabled a number of them because they did not work. I remember having to change out exhaust pipes because of rusting out with all the moisture present. I would think you would need to install stainless exhaust pipes. I will have to see what this system is and see someone use it for at least a year or two before passing judgement. This is one time you don't want to be an early adopter.


  6. In situations like this we use a heat gun, which is a industrial version of a hair dryer, and heat the hose until pliable enough. Also spray with WD 40 helps. Be sure the hose is the right size. The id has to be the od of the flat part of the tubing so that the barb is slightly larger. Sometimes the tank and the fill tube are of different diameters, requiring a tapered hose.

×
×
  • Create New...