oldgrape Report post Posted October 22, 2016 Hello all. I replaced my NORCOLD fridge with a residential one. I have been trying to figure out how to close off the exterior vent door for the fridge. The AC escapes out the vent part of the panel.I tried spray foam but that just made a mess. Anyone out there figure out a good way to seal it off? Share this post Link to post Share on other sites
abyrd Report post Posted October 22, 2016 I took a 2" thick piece of foil faced Styrofoam and attached Velcro strips. I install when RV need heating, otherwise I remove it. I blocked the ceiling vent with same material and leave in place. Jim Share this post Link to post Share on other sites
BillAdams Report post Posted October 22, 2016 I used spray foam. Just tape up the vents from the outside and foam it from the inside. I left the roof vent open but if I wanted to seal that I would likely use something similar to what abyrd did. Share this post Link to post Share on other sites
jleamont Report post Posted October 22, 2016 I siliconed screen door plastic screen in from behind and spray foamed it. The roof I spray foamed it and put the cover back on. Share this post Link to post Share on other sites
