TIMOTHYJBUNT Report post Posted April 14, 2017 Anyone hear of Ford V10 spark plugs blowing out of their holes? What is the best repair? Share this post Link to post Share on other sites
kaypsmith Report post Posted April 14, 2017 Yes have heard of that, Brett and Joe have posted on that issue before, it was posted in this post, maybe they will be back on soon. As Carl said, WELCOME TO THE FORUM. My First Experience With Coach-Net Share this post Link to post Share on other sites
jleamont Report post Posted April 14, 2017 TIMOTHYJBUNT, Did it happen to you? If not and your engine falls within the production run here's my recommendation. Go to the local ford dealer, purchase 10 spark plugs and coil boots (boots you might have to source from a local auto parts store, Ford once sold them separate but I heard they stopped). Replace all 10 spark plugs and when you install them. Remove the coil, blow compressed air into the hole to clear any debris (keep your face away, wear safety glasses), remove the spark plug, install the new plug and torque to 7-15 ft-lb, replace the coil boot, put a dab of die electric grease in the end of the boot, install the coil 44-62 in-lb. Share this post Link to post Share on other sites
jleamont Report post Posted April 14, 2017 If you have one or more stripped I would purchase this kit; It also has great instructions. http://www.oreillyauto.com/site/c/detail/LIS0/65900/N2377.oap?ck=Search_N2377_LIS_-1_-1&mc=LIS&mn=Lisle&pt=N2377&ppt=C1986 Share this post Link to post Share on other sites